CURRENT INJECTION SETS

Features :

• Built in µp based time interval meter measuring from 1 millisec to 9999 secs.

• Panel with easy & clear legends to read.

• Continuously variable outputs.

• Digital ammeter & voltmeter.

• Auto cut-off & output isolated.

• Self sensing of contacts i.e. NO or NC.

• Potential free start - stop signals.

• Fully portable , table top models with metal cover

Primary current injection sets

Model	Current Output AC				Metering
AEP - 1	1000 A / 2 V	500 A / 4V	250A / 8V		a) 3 1/2 Digit, Digital ammeter OR b) Analog ammeter with multiplying factor
AEP - 2	1000 A / 5 V	500 A / 10V	250A / 20V
AEP - 3	2000 A / 2 V	1000 A / 4V	500A / 8V	250 A /16 V
AEP - 4	2000 A / 4V	1000 A / 8V	500A / 16V	250 A /32 V
AEP - 5	3000 A / 2 V	1500 A / 4V	750A / 8V
AEP - 6	4000 A / 2 V	2000 A / 4V	1000A / 8V
AEP - 7	5000 A / 2 V	2500 A / 4V	1250A / 8V

Supply voltage : 230V AC +/- 10%,50 Hz.
Indications        : Main ON, Output ON, Output OFF.
Operation         : Contactor controlled push buttons for output ON/OFF.
Duty cylced       : 30 Min ON /15 min. OFF.
Protection         : a) Fuse / MCB . b) Over current protection.
Termination      : The outputs are brought out on the suitable bus bars.

Secondary current injection sets / Relay test sets

Supply voltage	: 230V AC +/- 10%,50 Hz.
Metering	: a) 3 1/2 Digit digital Voltmeter   b) 3 1/2 Digital percentage Ammeter   c) 4 Digit µp based time interval meter 9.999 / 99.99 / 999.9 / 9999    secs. selectable.
Timer Control Circuit	: The timer automatically starts when the output is initiated and   automatically stops when   the device under test operates.
Test Conditions	: a) Current activated device without auxiliary contacts.   b) NO contacts.   c) NC contacts.
Auto cut-off	: Cuts off output on operation of item under test.
Operation	: Contactor controlled push buttons for output ON/OFF.
Duty cylced	: 120Min ON / 30 min. OFF.
Indications	: Main ON, Output ON, Output OFF.
Protection	: a) Fuse / MCB . b) Over current protection.